Journal
KSCE Journal of Civil Engineering
- C.K.
Iu, W.F. Chen, S.L. Chan, and T.W. Ma. (2008). “Direct Second-Order
Elastic Analysis for Steel Frame Design”, KSCE Journal of Civil
Engineering (2008) 12(6):379-389 (down-load PDF 729 kb)
- W. F. Chen. (2008). “Structural Engineering: Seeing the Big
Picture”, KSCE Journal of Civil Engineering, Vol. 12, No. 1 / January
2008, pp. 25~29 (down-load PDF 91.3 kb)
- Hyeong-Yeol Kim, Youn-Ju Jeong, Tae-Hyup Kim, and Sun-Kyu Park.
(2006). “Structural Performance of Steel-concrete Composite Deck
forSteel-box Girder Bridges”, KSCE Journal of Civil Engineering, Vol.
10, 5 / September 2006, pp 357-363 (down-load PDF 1.35 mb)
ASCE PUBLICATION
- Design of Blast Resistant Buildings in Petrochemical Facilities, 280 pages (non-original print out, base on scan works)
down load this pdf file 11 Mb
- The Vision for Civil Engineering in 2025,
Prepared by the ASCE Steering Committee for The Summit on the Future of
Civil Engineering – 2025, June 21-22, 2006. report 114 pages ( down-load file PDF 3.01 Mb).
ACI STRUCTURAL JOURNAL
- D. Ngo and A.C. Scordelis .(1967). “Finite Element Analysis of Reinforced Concrete Beams”, ACI Journal , March 1967 (down-load PDF 2,848 kb) ini merupakan paper klasik pembahasan f.e.m untuk struktur beton bertulang
- Ramon L. Carrasquillo, Arthur H. Nilson, and Floyd O. Slate. (1981).
“Properties of High Strength Concrete Subject to Short-Term Loads”,
ACI Journal, March-April 1981(down-load PDF 581 kb)
- Peter Marti .(1985). “Basic Tools of Reinforced Concrete Beam Design”, ACI Journal, January-February 1985 (down-load PDF 3,038 kb)
- Frank J. Vecchio and Michael P. Collins.(1986). “The Modified
Compression-Field Theory for Reinforced Concrete Element Subjected to
Shear”, ACI Journal, March-April 1986 (down-load PDF 1,568 kb)
- Frank J. Vecchio and Michael P. Collins .(1988). “Predicting the
Response of Reinforced Concrete Beams Subjected to Shear Using Modified
Compression Field Theory”, ACI Structural Journal, May-June 1988 (down-load PDF 1,280 kb)
- Julio A. Ramirez and John E. Breen .(1991). “Evaluation of a
Modified Truss-Model Approach for Beams in Shear”, ACI Structural
Journal, V.88, No.5, September-October 1991 (down-load 2,500 kb)
- Michael P. Collins, Denis Mitchell, Perry Adebar and Frank J.
Vecchio .(1996). “A General Shear Design Method”, ACI Structural
Journal, January-February 1996 (down-load PDF 1,401 kb)
- Brian S. Maxwell and John E. Breen. (2000). “Experimental Evaluation
of Strut-and-Tie Model Applied to Deep Beam with Opening”, ACI
Structural Journal, V.97 No.1, Januari-Februari 2000 (down-load 1,880 kb)
- Federico A. Tavarez, Lawrence C. Bank, and Michael E. Plesha
.(2003). “Analysis of Fiber-Reinforced Polymer Composite Grid Reinforced
Concrete Beams”, ACI Structural Journal, March-April 2003 (down-load PDF 1,367 kb)
- Daniel Palermo and Frank J. Vecchio .(2003). “Compression Field
Modeling of Reinforced Concrete Subjected to Reversed Loading:
Formulation”, ACI Structural Journal, V. 100 / 5 (down-load PDF 182 kb)
- Joel M. Barron and Mary Beth D. Hueste.(2004). “Diaphragm Effects in
Rectangular Reinforced Concrete Buildings”, ACI Structural Journal,
V. 101 / 5 (down-load PDF 189 kb)
- Juan F. Correal, M. Saiid Saiidi, David Sanders, and Saad
El-Azazy.(2007). “Shake Table Studies of Bridge Columns with Double
Interlocking Spirals”, ACI Structural Journal V. 104 / 4 (down-load PDF 1139 kb)
- Khaldoun N. Rahal. (2007). “Combined Torsion and Bending in
Reinforced and Prestressed Concrete Beams Using Simplified Method for
Combined Stress-Resultants”, ACI Structural Journal, V. 104 / 4 (down-load PDF 630 kb)
- P. Revathi and Devdas Menon.(2007). “Slenderness Effects in Reinforced Concrete Beams”, ACI Structural Journal, V. 104 / 4 (down-load PDF 570 kb)
- Keun-Hyeok Yang, Heon-Soo Chung, and Ashraf F.
Ashour.(2007).”Influence of Shear Reinforcement on Reinforced Concrete
Continuous Deep Beams”, ACI Structural Journal, V. 104 / 4 (down-load PDF 674 kb)
- Joseph Robert Yost, Shawn P. Gross, David W. Dinehart, and Jason J.
Mildenberg.(2007). “Flexural Behavior of Concrete Beams Strengthened
with Near-Surface-Mounted CFRP Strips”, ACI Structural Journal, V. 104 /
4 (down-load PDF 605 kb)
- Kyoung-Kyu Choi, Mahmoud M. Reda Taha, and Alaa G. Sherif .(2007).
“Simplified Punching Shear Design Method for Slab-Column Connections
Using Fuzzy Learning”, ACI Structural Journal, V. 104 / 4 (down-load PDF 572 kb)
- Mary Beth D. Hueste, JoAnn Browning, Andres Lepage, and John W.
Wallace .(2007). “Seismic Design Criteria for Slab-Column Connections”,
ACI Structural Journal, V. 104 / 4 (down-load PDF 315 kb)
- Hung-Jen Lee and Jen-Wen Ko. (2007).”Eccentric Reinforced Concrete
Beam-Column Connections Subjected to Cyclic Loading in Principal
Directions”, ACI Structural Journal, V. 104 / 4 (down-load PDF 676 kb)
- Alexandros G. Tsonos.(2007). “Cyclic Load Behavior of Reinforced
Concrete Beam-Column Subassemblages of Modern Structures”, ACI
Structural Journal, V. 104 / 4 (down-load PDF 982 kb)
- Nam Ho Lee, Kang Sik Kim, Chang Joon Bang, and Kwang Ryeon
Park.(2007). “Tensile-Headed Anchors with Large Diameter and Deep
Embedment in Concrete”, ACI Structural Journal, V. 104 / 4 (down-load PDF 765 kb)
- José R. MartÃ-Vargas, César A. Arbeláez, Pedro Serna-Ros, and Carmen
Castro-Bugallo.(2007). “Reliability of Transfer Length Estimation
from Strand End Slip”, ACI Structural Journal, V. 104 / 4 (down-load PDF 419 kb)
- Miguel Fernández Ruiz and Aurelio Muttoni.(2007). “On Development of
Suitable Stress Fields for Structural Concrete”, ACI Structural
Journal, V. 104 / 4 (down-load PDF 557 kb)
- Discussion by Himat Solanki:
Shear Strength of Reinforced Concrete T-Beams without Transverse
Reinforcement. Paper by A. Koray Tureyen, Tyler S. Wolf, and Robert J.
Frosch (From the Sept.-Oct. 2006 ACI Structural Journal) (down-load PDF 72 kb)
BULLETIN of THE NEW ZEALAND NSEE
- M.J.
Nigel Priestley .(1993).”Myths and Fallacies in Earthquake
Engineering – Conflict between Design and Reality”, Bulletin of The New
Zealand National Society for Earthquake Engineering, Vol. 26, No.3
September 1993 (down-load PDF 2,580 kb)
- Stefano Pampanin. (2006). “Controversial Aspects in Seismic
Assessment and Retrofit Of Structures in Modern Times: Understanding and
Implementing Lessons from Ancient Heritage”, Bulletin of The New
Zealand Society for Earthquake Engineering, Vol. 39, No. 2, June 2006 (dow-load PDF 1.7 Mb)
- NZSEE. (2006). “Assessment and Improvement of the Structural
Performance of Buildings in Earthquakes – Prioritisation Initial
Evaluation Detailed Assessment Improvement Measures”, Reccommendations
of a NZSEE Study Group on Earthquake Risk Buildings, June 2006 (down-load PDF 5.8 Mb, 343 pages)
CANADIAN JOURNAL of CIVIL ENGINEERING
- M.P.
Collins, F.J. Vecchio and G. Mehlhorn .(1985). “An international
competition to predict the response of reinforced concrete panels”,
Can. J. Civ. Eng. 12: 624–644 (down-load PDF 2,965 kb)
- F.J. Vecchio and S. Balopoulou .(1990). “On the nonlinear behaviour
of reinforced concrete frames”, Can. J. Civ. Eng. 17: 698–704 (down-load PDF 1,375 kb)
- R.G. Selby and F.J. Vecchio .(1997). “A constitutive model for
analysis of reinforced concrete solids”, Can. J. Civ. Eng. 24: 460–470 (down-load PDF 1,477 kb)
- D. Svecova and R.J. Eden .(2004). “Flexural and shear strengthening
of timber beams using glass fibre reinforced polymer bars — an
experimental investigation”, Can. J. Civ. Eng. 31: 45–55 (down-load PDF 1,929 kb)
- William Cavers and Gordon A. Fenton .(2004). “An evaluation of pile
cap design methods in accordance with the Canadian design standard”,
Can. J. Civ. Eng. 31: 109–119 (down-load PDF 223 kb)
- Aftab A. Mufti, Baidar Bakht, Dagmar Svecova, and Vidyadhar Limaye
.(2004). “Failure tests on full-scale models of grout laminated wood
decks”, Can. J. Civ. Eng. 31: 133–145 (down-load PDF 774 kb)
- Ricardo N.F. do Carmo and Sérgio M.R. Lopes .(2005). “Ductility and
linear analysis with moment redistribution in reinforced high-strength
concrete beams”, Can. J. Civ. Eng. 32: 194–203 (down-load PDF 478 kb)
- Y.F. Li, S.H. Chen, K.C. Chang, and K.Y. Liu .(2005). “A
constitutive model of concrete confined by steel reinforcements and
steel jackets”, Can. J. Civ. Eng. 32: 279–288 (down-load PDF 662 kb)
COMPUTER and CONCRETE
- Frank J. Vecchio,
Evan C. Bentz and Michael P. Collins .(2004). “Tools for forensic
analysis of concrete structures”, Computers and Concrete, Vol. 1, No. 1
(2004) 1-14 (down-load PDF 1,224 kb)
COMPUTER and STRUCTURES
- Lip
H. Teh.(2004).”Beam element verification for 3D elastic steel frame
analysis”, Computers and Structures 82 (2004) 1167–1179 (down-load PDF 400 kb)
Note : Dr. Lip lahir di Indonesia, saat ini adalah pakar struktur sekaligus dosen di University of Sidney, ada beberapa comment
beliau di blog ini yang mendukung. Opini beliau ditampilkan pada
sampul belakang buku SAP2000 Edisi Baru yang terbit tahun 2007 ini.
Thanks Dr. Lip.
COMPOSITE STRUCTURES
A.J.M.
Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes .(2001).
“Modelling of concrete beams reinforced with FRP re-bars”, Composite
Structures 53 (2001) 107-116 (
down-load PDF 322 kb)
CONCRETE INTERNATIONAL
- K.W.
Day. (1981). “Quality Control of 55 MPa Concrete for Collins Place
Project, Melbourne, Australia”, Concrete International, March 1981 (down-load PDF 1,266 kb)
- D.M. Rogowsky and J.G. MacGregor .(1986). “Design of Reinforced
Concrete Deep Beams – Using the strut and tie model”, Concrete
International, August 1986 (down-load PDF 2,685 kb)
- James K. Wight And Gustavo J. Parra-Montesinos . (2003).
“Strut-and-Tie Model for Deep Beam Design: A practical exercise using
Appendix A of the 2002 ACI Building Code”, Concrete International, May
2003 (down-load PDF 156 kb)
CONSTRUCTION AND BUILDING MATERIALS
- R.F.
Pedreschi, B.P. Sinha.(2007). “An experimental study of cold formed
steel trusses using mechanical clinching”, Constr Build Mater (2007),
doi:10.1016/j.conbuildmat.2006.12.014 (down-load PDF 1021 kb)
EARTHQUAKE ENGINEERING and ENGINEERING SEISMOLOGY
- Thomas
Paulay .(1999). “A Simple Seismic Design Strategy Based on
Displacement and Ductility Compatibility”, Earthquake Engineering and
Engineering Seismology, Vol.1 No.1 (down-load PDF 489 kb)
- C. H. Yeh and C. H. Loh .(2001). “Methodology of Seismic Hazard
Analysis and Damage Assessment”, Earthquake Engineering and Engineering
Seismology, Vol.3 No.1 (down-load PDF 560 kb)
EARTHQUAKE ENGINEERING and STRUCTURAL DYNAMICS
- Sinan
Akkar and Julian J. Bommer.(2007). “Prediction of elastic
displacement response spectra in Europe and the Middle East”,
Earthquake Engng Struct. Dyn. 2007; 36:1275–1301 (down-load PDF 563 kb)
- Chin-Hsiung Loh, Jerome P. Lynch, Kung-Chun Lu, Yang Wang, Chia-Ming
Chang, Pei-Yang Lin and Ting-Hei Yeh.(2007). “Experimental
verification of a wireless sensing and control system for structural
control using MR dampers”, Earthquake Engng Struct. Dyn. 2007;
36:1303–1328 (down-load PDF 917 kb)
- Songye Zhu and Yunfeng Zhang.(2007). “Seismic behaviour of
self-centring braced frame buildings with reusable hysteretic damping
brace”, Earthquake Engng Struct. Dyn. 2007; 36:1329–1346 (down-load PDF 647 kb)
- R. Pinho, C. Casarotti and S. Antoniou.(2007). “A comparison of single-run pushover analysis techniques for
seismic assessment of bridges”, Earthquake Engng Struct. Dyn. 2007; 36:1347–1362 (down-load PDF 828 kb)
- Manuel Navarro,Francisco Vidal, Takahisa Enomoto, Francisco J.
Alcala, Antonio Garcia-Jerez, Francisco J. Sanchez and Norio
Abeki.(2007). “Analysis of the weightiness of site effects on reinforced
concrete (RC) building seismic behaviour: The Adra town example (SE
Spain)”, Earthquake Engng Struct. Dyn. 2007; 36:1363–1383 (down-load PDF 843 kb)
- M. R. Ghayamghamian, and G. R. Nouri.(2007). “On the characteristics of ground motion rotational components
using Chiba dense array data”, Earthquake Engng Struct. Dyn. 2007; 36:1407–1429 (down-load PDF 958 kb)
EARTHQUAKE SPECTRA
- Peter Fajfar .(2000). “A Nonlinear Analysis Method for Performance Based Seismic Design”, Earthquake Spectra, Vol.16 No.3 (down-load PDF 167 kb)
- Keith A. Porter,James L. Beck,and Rustem Shaikhutdinova .(2004).
“Simplified Estimation of Economic Seismic Risk for Buildings”,
Earthquake Spectra, Vol.20,No.4 (down-load PDF 579 kb)
ENGINEERING CONCRETE
E.
Montoya, F.J. Vecchio, S.A. Sheikh .(2004). “Numerical evaluation of
the behaviour of steel and FRP-confined concrete columns using
compression field modelling”, Engineering Structures 26(2004) 1535-1545 (
down-load PDF 393 kb)
ENGINEERING STRUCTURES
- Seung-Eock
Kim, Kyung-Won Kang, Dong-Ho Lee .(2003). “Full-scale testing of
space steel frame subjected to proportional loads”, Engineering
Structures 25 (2003) 69–79 (down-load PDF 562 kb)
- H. Sezen, A.S. Whittaker, K.J. Elwood, K.M. Mosalam .(2003).
“Performance of reinforced concrete buildings during the August 17, 1999
Kocaeli, Turkey earthquake, and seismic design and construction
practise in Turkey”, Engineering Structures 25 (2003) 103–114 (down-load PDF 1,099 kb)
- L. Cavaleri, N. Miraglia, M. Papia .(2003). “Pumice concrete for
structural wall panels”, Engineering Structures 25 (2003) 115–125 (down-load PDF 586 kb)
- John L. Wilson .(2003). “Earthquake response of tall reinforced concrete chimneys”,Engineering Structures 25 (2003) 11–24 (down-load PDF 234 kb)
- M. Brun, J.M. Reynouard, L. Jezequel .(2003). “A simple shear wall
model taking into account stiffness degradation”, Engineering
Structures 25 (2003) 1–9 (down-load PDF 362 kb)
ENGINEERING JOURNAL – AISC
- William A. Litle.(1966). “Small Scale Models for Steel Frameworks”, AISC Engineering Journal, July 1966 (down-load 2,580 kb)
- W.H. Munse .(1967). “High-Strength Bolting”, AISC Engineering Journal, January 1967 (down-load PDF 885 kb)
- A. Lally and W. A. Milek, JR..(1969). “Bridge Construction Details”, AISC Engineering Journal, January 1969 (down-load 452 kb)
- Allen E. Wehrmeister.(1969). “Use of Ultrasonic Testing in the
Structural Steel Industry”, AISC Engineering Journal, April 1969 (down-load 1,351 kb)
- R. H. R. Tide And T. V. Galambos .(1970). “Composite Open-Web Steel Joists”, AISC Engineering Journal, January 1970 (down-load 739 kb)
- Fazlur R. Khan and Anthony F. Nassetta.(1970).”Temperature Effects
on Tall Steel Framed Buildings – Part 3—Design Considerations”, AISC
Engineering Journal,October 1970 (down-load 506 kb)
- John H. A. Struik, Abayomi O. Oyeledun and John W. Fisher. (1973).
“Bolt Tension Control with a Direct Tension Indicator”, AISC
Engineering Journal, First Quarter 1973 (down-load 593 kb)
- T.V. Galambos .(1978). “Load Factor Design of Steel Buildings”, AISC Engineering Journal, July 1978 (down-load PDF 65 kb)
- S.T. Rolfe .(1977). “Fracture and Fatigue Control in Steel Structures”, AISC Engineering Journal, First Quarter (down-load 162 kb)
- N. Krishnamurthy .(1978). “A Fresh Look at Bolted End-Plated Behavior and Design”, Engineering Journal, Second Quarter (down-load 234 kb)
- John D. Griffiths .(1984). “End-Plate Moment Connections – Their Use and Misuse”, Engineering Journal, First Quarter (down-load PDF 42 kb)
- Michael P. Cohen .(1986). “Design Solutions Utilizing the Staggered-steel Truss System”, Engineering Journal, Third Quarter (down-load PDF 575 kb)
- Lambert Tall .(1989). “The Reinforcement of Steel Columns”, Engineering Journal, First Quarter 1989 (down-load 60 kb)
- Mark A. Bradford .(1991). “Buckling of Prestressed Steel Girders”, Engineering Journal, Third Quarter 1991 (down-load 50 kb)
- Patrick D. Zuraski .(1992). “The Significance and Application of Cb in Beam Design”, Engineering Journal, First Quarter (down-load PDF 115 kb)
- W. McGuire .(1992). “Computers and Steel Design”, Engineering Journal, Fourth Quarter (down-load PDF 1,120 kb)
- Engineering Journal Vol. 29 tahun 1992 – Lengkap 171 halaman
- Engineering Journal Vol. 30 tahun 1993 – Lengkap 152 halaman
JOURNAL OF THE CONSTRUCTION DIVISION
Boyd
C. Paulson, Jr. (1976). “Goal for Education and Research in
Construction”, Journal of Construction Division, September 1976 (
down-load PDF 103 kb)
JOURNAL of CONSTRUCTIONAL STEEL RESEARCH
A.M
Citipitioglu, R.M. Haj-Ali, D.W. White .(2002). “Refined 3D finite
element modeling of partially restrained connections including slip”,
Journal of Constructional Steel Research 58 (2002) 995-1013 (
down-load PDF 763 kb)
JOURNAL OF PERFORMANCE OF CONSTRUCTED FACILITIES – ASCE
- F.J.
Vecchio .(2002). “Contribution of Nonlinear Finite-Element Analysis
to Evaluation of Two Structural Concrete Failures”, Journal of
Performance of Constructed Facilities, Vol. 16 No.3, August 1, 2002 (down-load PDF 1,039 kb)
- Frederick R. Rutz, and Kevin L. Rens.(2007).”Wind Loads for 19th
Century Bridges: Design Evolution, Historic Failures, and Modern
Preservation”, Journal of Performance of Constructed Facilities, Vol. 21
No.2, April 1, 2007 (down-load PDF 758 kb)
JOURNAL of MATERIALS IN CIVIL ENGINEERING
Chee Kiong Soh, Yu Liu, Yue
Xing Dong and Xin Zheng Lu .(2003). “Damage Model Based
Reinforced-Concrete Element”, Journal of Materials in Civil
Engineering, Vol. 15, No.4, August 1, 2003 (
down-load PDF 336 kb)
JOURNAL of ENGINEERING MECHANICS – ASCE
- F.
J. Vecchio and A. DeRoo .(1995). “Smeared-Crack Modeling of Concrete
Tension Splitting”, Journal of Engineering Mechanics, Vol. 121 / 6 (down-load PDF 1,309 kb)
- In-Won Lee, Hyung-Jo Jung, Man-Cheol Kim, and Arthur R. Robinson
.(1999). “Eigensolution Method for Structures with Multiple or Close
Eigenvalues”, Journal of Engineering Mechanics, Vol.125/ 11 (down-load 117 kb)
- M. A. Bradford, B. Uy, Y. L. Pi. (2002). “In-plane Elastic Stability
of Arches Under a Centra Concentrated Load”, Journal of Engineering
Mechanics,Vol.128 / 7 (down-load PDF 188 kb)
- Ferhun C. Caner; and Zdenek P. Bazant .(2002).”Lateral Confinement
Needed to Suppress Softening of Concrete in Compression”, Journal of
Engineering Mechanics, Vol.128 / 12 (down-load PDF 1,438 kb)
- Lip H. Teh.(2005).”Spatial Rotation Kinematics and Flexural–Torsional Buckling”, Journal of Engineering
Mechanics, Vol. 131 / 6 (down-load PDF 100 kb)
JOURNAL of STRUCTURAL ENGINEERING – ASCE
- Virote
Boonyapinyo, Hitoshi Yamada and Toshio Miyata.(1994).”Wind-induced
Nonlinear Lateral-Torsional Buckling of Cable-Stayed Bridges, Journal
of Structural Engineering Vol.120/2 (down-load PDF 968 kb)
- Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of
Infilled Frames”, Journal of Structural Engineering, Vol.121/4 (down-load PDF 3,066 kb)
- M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis
of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12
(down-load PDF 462 kb)
- Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997).
“Modeling of Masonry Infill Panels for Structural Analysis”, Journal of
Structural Engineering Vol.123/10 (down-load PDF 5,680 kb)
- Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of
Absorber for MDOF Structures, Journal of Structural Engineering, Vol.
124/11 (down-load PDF 776 kb)
Note : Dr. Yoyong Arfiadi sekarang aktif di Jurusan Teknik
Sipil, Universitas Atmajaya Yogyakarta, paper tersebut ditulis pada
saat beliau mengambil Ph.D program di Australia
- Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive
Design of Semirigid Steel Frames”, Journal of Structural Engineering,
May 1999 (down-load PDF 2,341 kb)
- M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of
Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 /
12 (down-load PDF 1,281 kb)
- Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997).
“Seismic Performance and Retrofit Evaluation of Reinforced Concrete
Structures”, Journal of Structural Enginering, Vol. 123 / 1 (down-load PDF 769 kb)
- Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete
Frame Element with Bond Interfaces II: State Determinations and
Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3 (down-load PDF 158 kb)
- Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002).
“Performance-Based Optimization for Strut-Tie Modeling of Structural
Concrete”, Journal of Structural Engineering, Vol.128 / 6 ( down-load PDF 1,014 kb)
- Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse
Analysis: Large Inelastic Deformations Analysis of Planar Frames”,
Journal of StructuralEngineering, Vol. 128 / 12 (down-load PDF 184 kb)
- F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical
Re-examination of Classic Concrete Beam Tests”, Journal of Structrual
Engineering, Vol. 130 / 3 (down-load PDF 654 kb)
- Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and
Deflection of Steel–Concrete Composite Beams under Negative Bending”,
Journal of Structural Engineering, Vol. 130 / 11 (down-load PDF 145 kb)
- Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct
Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom
Systems through Incremental Dynamic Analysis of Single Degree of Freedom
Approximation”, Journal of Structural Engineering, Vol. 131 / 4 ( down-load PDF 182 kb)
- Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of I-Beams”, Journal of
Structural Engineering, Vol. 133 / 7 (down-load PDF 355 kb)
- Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007).
“Near-Fault Ground Motion Effects on Reinforced Concrete Bridge
Columns”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 289 kb)
- Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist
Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 256 kb)
- Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007).
“Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic
Loading”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 313 kb)
- K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance
Vectors for Performance-Based Structural Engineering”, Journal of
Structural Engineering, Vol. 133, No. 7 (down-load PDF 171 kb)
- Thiru Aravinthan, and T. G. Suntharavadivel. (2007). “Effects of
Existing Shear Damage on Externally Posttensioned Repair of Bent Caps”,
Journal of Structural Engineering, Vol. 133, No. 11, November 1, 2007.
(down-load PDF 559 kb)
JOURNAL of BRIDGE ENGINEERING – ASCE
- Uwe Starossek.(1996).”Cable-Stayed Bridge Concept for Longer Spans”, Journal of Bridge Engineering, Vol.1, No.3 (down-load PDF 376 kb)
- Sami W. Tabsh and Kalpana Sahajwani .(1997). “Approximate Analysis
of Irregular Slab-on-Girder Bridges”, Journal of Bridge
Engineering,Vol. 2 / 1 (down-load PDF 614 kb)
- Mounir E. Mabsout, Kassim M. Tarhini, Gerald R. Frederick and
Charbel Tayar .(1997). “Finite-Element Analysis of Steel Girder Highway
Bridges”, Journal of Bridge Engineering,Vol. 2 / 3 (down-load PDF 501 kb)
- Eric M. Hines, David P. Billingtion .(1998). “Case Study of Bridge
Design Competition”, Journal of Bridge Engineering, Vol.3, No.3 (down-load PDF 1,035 kb)
- A. Zureick and R. Naqib .(1999). “Horizontally Curved Steel I
Girders State of The Art Analysis Methods”, Journal of Bridge
Engineering, Vol. 4 / 1 (down-load PDF 115 kb)
- Constantine C. Spyrakos, Emory L. Kemp,and Ramesh
Venkatareddy.(1999).”Validated Analysis Of Wheeling Suspension Bridge”,
Journal of Bridge Engineering, Vol.4, No.1 (down-load PDF 185 kb)
- Marco Rosignoli .(1999). “Prestressing Schemes For Incrementally Launched Bridges”, Journal
of Bridge Engineering, Vol.4, No.2 (down-load PDF 233 kb)
- Wei-Xin Ren and Makoto Obata. (1999). “Elastic-Plastic Seismic
Behavior of Long Span Cable-Stayed Bridges”, Journal of Bridge
Engineering Vol.4, No.3 (down-load 214 kb)
- Toorak Zokaie .(2000). “AASHTO-LRFD Live Load Distribution Specification”, Journal of Bridges Engineering,Vol. 5 / 2 (down-load PDF 241 kb)
- K. E. Barth and D. W. White .(2000).”Inelastic Design of Steel I-Girder Bridges”, Journal of Bridge Engineering, Vol. 5 / 3 (down-load PDF 224 kb)
- Brett A. McElwain and Jeffrey A. Laman .(2000). “Experimental
Verification of Horizontally Curved I-Girder Bridge Behavior”, Journal
of Bridge Engineering, Vol. 5, No. 4 (down-load PDF 189 kb)
- Sami W. Tabsh and Muna Tabatabai.(2001).”Live Load Distribution In
Girder Bridges Subject To Oversized Trucks”, Journal of Bridge
Engineering, Vol.6, No.1 (down-load PDF 194 kb)
- Hung-Shan Shu and Yang-Cheng Wang.(2001).”Stability Analysis Of
Box-Girder Cable-Stayed Bridges”, Journal of Bridge Engineering, Vol.6,
No.1 (down-load PDF 140 kb)
- Q. W. Zhang, T. Y. P. Chang, and C. C. Chang .(2001).
“Finite-Element Model Updating for The Kap Shui Mun Cable-Stayed
Bridge”, Journal of Bridge Engineering, Vol. 6 / 4 (down-load PDF 146 kb)
- Gregor P. Wollmann.(2001).”Preliminary Analysis of Suspension Bridges”, Journal of Bridge Engineering, Vol.6, No.4 (down-load PDF 136 kb)
- M. Schlaich .(2001). “Erection of Cable-Stayed Bridges Having
Composite Decks With Precast Concrete Slabs”, Journal of Bridge
Engineering, Vol. 6 / 5 (down-load PDF 93 kb)
- Bruce A. Moulds .(2001). “Design Considerations for Aircraft Bridges”, Journal of Bridge Engineering, Vol. 6 / 6 (down-load PDF 188 kb)
- Junsik Eom and Andrzej S. Nowak .(2001).”Live Load Distribution For
Steel Girder Bridges”, Journal of Bridge Engineering, Vol.6, No.6 (down-load PDF 403 kb)
- Zhong Liu, Fang Li, and W. M. Kim Roddis .(2002).”Analytic Model of
Long-Span Self-Shored Arch Bridge”,Journal of Bridge Engineering,
Vol.7, No.1 (down-load PSDF 235 kb)
- Khaled M. Sennah, and John B. Kennedy .(2002).”Literature Review in
Analysis of Box-Girder Bridges”,Journal of Bridge Engineering, Vol.7,
No.2 (down-load PDF 85 kb)
- Ahmad M. Itani, Michael Bruneau, Lyle Carden and Ian G. Buckle
.(2004). “Seismic Behavior of Steel Girder Bridge Superstructures”,
Journal of Bridges Engineering,Vol. 9 / 3 (down-load PDF 608 kB)
JOURNAL of ADVANCED CONCRETE TECHNOLOGY
- Hajime Okamura and Masahiro Ouchi .(2003). “Self-Compacting Concrete”, Journal of Advanced Concrete Technology, Vol.1 No.1 (down-load PDF 1,908 kb)
- Shunsuke Otani .(2004). “Earthquake Resistant Design of Reinforced
Concrete Buildings – Past and Future”, Invited Paper, Journal of
Advanced Concrete Technology Vol.2 No.1 (down-load PDF 288 kb)
- Kiang Hwee Tan . (2004). “Design of Non-Prismatic RC Beams Using
Strut-and-Tie Models”, Journal of Advanced Concrete Technology, Vol. 2
No.2 (down-load PDF 422 kb)
- Tomohiro Miki and Junichiro Niwa . (2004). “Nonlinear Analysis of RC
Structural Members Using 3D Lattice Model”, Journal of Advanced
Concrete Technology, Vol. 2 No.3 (down-load PDF 1,257 kb)
JOURNAL OF STRUCTURAL ENGINEERING SOCIETY NEW ZEALAND
John Butterworth .(2000).
“Ductile Concentrically Braced Frames using Slotted Bolted Joints”,
SESOC Journal Vol. 13 No.1 April 2000 (
down-load PDF 131 kb)
JOURNAL of WIND ENGINEERING and INDUSTRIAL AERODYNAMICS
Toshio
Miyata.(2003).”Historical view of long-span bridge aerodynamics”,
Journal of Wind Engineering and Industrial Aerodynamics 91 (2003)
1393–1410 (
down-load PDF 614 kb)
MODERN OF STEEL CONSTRUCTIONS
- Kenneth
J. Wright and Matthew A. Bunner .(1997). “High Strength Steel Reduces
Truss Costs: A new bridge across the Chelyan River in West Virginia
utilized Gr.36, 50 and 70 steels”, Modern Steel Construction / October
1997 (down-load PDF 139 kb)
- Steven A. Weinhold, P.E. .(1997). “Erection Engineering For Steel
Bridge Superstructures”, Modern Steel Construction / October 1997 (down-load PDF 21 kb)
- Michael E. Trunko .(1997). “Galvanizing Eliminates Repainting On
Bridges : A turn-key operation specializes in designing, fabricating and
erecting galvanized truss bridges, Modern Steel Construction /
October 1997 (down load PDF 132 kb)
- Lawrence G. Griffis .(2006). A Culture of Discipline: Structural
engineers must approach their work with diligence and a great sense of
responsibility to themselves, their firms, and society”, Modern Steel
Construction / December 2006 (down-load PDF 91 kb)
PCI JOURNAL
- M.J.
Nigel Priestley, S. (Sri) Sritharan, James R. Conley, Stefano
Pampanin. (1999). “Preliminary Results and Conclusions From the PRESSS
Five-Story Precast Concrete Test Building”, PCI JOURNAL
November-December 1999 (down-load PDF 626 kb)
- Sidney Freedman .(1999). “Loadbearing Architectural Precast Concrete Wall Panels”, PCI JOURNAL September-October 1999 (down-load PDF 1192 kb)
ROYAL ACADEMY of ENGINEERING
Tony Fitzpatrick.(1991).
“Linking London: The Millennium Bridge”,The Royal Academy of
Engineering, Westminster, London, June 2001 (
down-load PDF 799 kb)
STRUCTURAL CONCRETE
- F. J. Vecchio .(2001). “Non-linear finite element analysis of
reinforced concrete: at the crossroads ?”, Structural Concrete 2001
Vol.2 No. 4 (down-load PDF 1,228 kb)
- Stefano Pampanin .(2003). “Alternative design philosophies and
seismic response of precast concrete buildings”, Structural Concrete
2003 Vol.4 No.4 (down-load PDF 1,655 kb) . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category
- E. Caetano and A. Cunha.(2004). “Experimental and numerical
assessment of the dynamic behaviour of a stress-ribbon footbridge”,
Structural Concrete 2004 Vol.5,No.1 (down-load PDF 456 kb)
- C. G. Papanicolaou and T. C. Triantafillou .(2004). “Analysis and
minimum cost design of concrete sandwich panels under out-of-plane
loading”, Structural Concrete 2004 Vol.5,No 1 (down-load PDF 437 kb)
STRUCTURAL ENGINEERING INTERNATIONAL
- Michel Virlogeux, Claude Servant, Jean-Marie Cremer,Jean-Pierre
Martin, Marc Buonomo.(2005). “Millau Viaduct, France”, Structural
Engineering International 1/2005 (down-load PDF 415 k)
- Federico M. Mazzolani.(2006). “Structural Applications of Aluminium
in Civil Engineering”, Structural Engineering International 4/2006 (down-load PDF 266 k)
THIN-WALLED STRUCTURES – ELSEVIER
- K.F. Chung *, K.H. Ip.(2000).”Finite element modeling of bolted
connections between coldformed steel strips and hot rolled steel
plates under static shear loading”, Engineering Structures 22 (2000)
1271–1284 (down-load PDF 1.53 Mb)
- H.C. Ho, K.F. Chung .(2006). “Analytical prediction on deformation
characteristics of lapped connections between cold-formed steel Z
sections”, Thin-Walled Structures 44 (2006) 115-130 (down-load PDF 492 kb)
- Tae Soo Kima, Hitoshi Kuwamura. (2007). “Finite element modeling of
bolted connections in thin-walled stainless steel plates under static
shear”, Thin-Walled Structures 45 (2007) 407–421 (down-load PDF 1.07 Mb)
ELECTRONIC JOURNAL OF STRUCTURAL ENGINEERING
- Mendis,P., Ngo,T., Haritos,N., Hira,A., Samali,B., Cheung,J.
(2007).”Wind Loading on Tall Buildings”, EJSE Special Issue: Loading on
Structures (down-load PDF 648 kb)
